SSブログ

Works - DRGW Wood-side MOW Foreman Office Car X2390 - 02 [Works_MOW Equipment]

x_01.jpg: before and after
x_02.jpg: transplanting

I cut off the Atlas' sides leaving the ribs for the convenience of later transplanting. The doors on ends were cut from TICHY's parts.
TICHY's side parts were a little low. So I filled the space with a thin brass plate to simulate the wrapped down roof. The ladders not existing on the Rio Grande cars were left because of its difficulty to shaving off.

Other parts used are;
BLMA #402 Freight Car Stirrups
MICRO-TRAINS #003 02 021 BETTENDORF TRUCKS w/couplers

After spraying silver, I finished the car with self-made decal.


まず、Atlas製貨車の側板を、裏のリブを残して切り取った。妻につく扉は、逆に、TICHYの妻板から切り出した。合わせてみるとTICHYの側板の背が少し足りない。そこで真鍮の薄板を貼って、パテ・ペーパーで屋根となじませ、プロトタイプ同様貼り下げ屋根にした。
側面扉横のハシゴはプロトタイプにないが、削ったあとの板張り表現の難しさを思い、そのまま残した。

コメント(0)  トラックバック(0) 

コメント 0

コメントを書く

お名前:[必須]
URL:
コメント:
画像認証:
下の画像に表示されている文字を入力してください。

トラックバック 0