Paint Shop – 12: Clinchfield Boxcar 7011, part 1 [Works_Boxcars]
: Clinchfield 7011
The other boxcar red boxcar which I can create with my surplus decal was this one. I found a boxcar with the body similar to the one made by Athearn: Clinchfield 7011 at Fallen Flag site. We can see 7054 at RR Picture Archives site and rather blurred picture of 7008 at Boxcars & Freight Cars of North America site.
I shove stirrups and upper half of the ladder on side as seen in the photo. Some ladders by GOLD MEDAL MODELS were added after the shaving. I also took off the roof walk and changed the brake wheel with MTL parts.
7011 has a low straight sill. If I accurately extend the sill of this model, the sill would conflict with trucks. So I decided to add thin nickel silver plate to represent the unique form. Rivets on the sill were applied with Archer decal.
I spray painted the body boxcar red with TAMIYA TS-33 (DULL RED) and applied Microscale #60-4350 decal.
Clinchfield 7011 prototype photo found in Fallen Flag site;
Clinchfield 7054 prototype photo found in RR Picture Archives site;
Clinchfield 7008 prototype photo found in Boxcars & Freight Cars of North America
Parts I used;
Athearn #14157 PS-1 boxcar
GOLD MEDAL MODELS #160-25 Freight Car Ladders
MTL #499 05 050 AJAX BRAKE WHEELS
Decal I used;
: applied sill, stirrup and brake wheel
何か、Boxcar Redのコレクションを増やせないか、とインターネットでネタを探していたら、Athearn製品によく似た車体をもつ車両の写真を見つけた。Clinchfield の7011である。このプロトタイプと同じスキームは、地が青や緑色などのものが、MTLから特製品として発売されている。しかし、例によって高値であるので自作することにした。
画像を参照しながら、屋根上の歩み板を撤去し、屋根までのはしごの上半分を削った。モールドで表現されているタラップも削り落とし、GOLD MEDAL MODELSのFreight Car Laddersを取り付けた。
プロトタイプは、低い直線状の独特の形状をした裾をしている。模型の造形を活かしながら車体側面の裾をこの特徴ある形状にすると台車に当たりそうなので、肉厚のプラスティックによる裾を切り取り、0.2ミリ厚の洋白板で作り直してみた。これなら台車の邪魔にならない。裾のリベットはArcherのデカールである。
いつものように、タミヤのTS-33・ダルレッドを吹き、Microscaleのデカールを貼って仕上げた。
The other boxcar red boxcar which I can create with my surplus decal was this one. I found a boxcar with the body similar to the one made by Athearn: Clinchfield 7011 at Fallen Flag site. We can see 7054 at RR Picture Archives site and rather blurred picture of 7008 at Boxcars & Freight Cars of North America site.
I shove stirrups and upper half of the ladder on side as seen in the photo. Some ladders by GOLD MEDAL MODELS were added after the shaving. I also took off the roof walk and changed the brake wheel with MTL parts.
7011 has a low straight sill. If I accurately extend the sill of this model, the sill would conflict with trucks. So I decided to add thin nickel silver plate to represent the unique form. Rivets on the sill were applied with Archer decal.
I spray painted the body boxcar red with TAMIYA TS-33 (DULL RED) and applied Microscale #60-4350 decal.
Clinchfield 7011 prototype photo found in Fallen Flag site;
Clinchfield 7054 prototype photo found in RR Picture Archives site;
Clinchfield 7008 prototype photo found in Boxcars & Freight Cars of North America
Parts I used;
Athearn #14157 PS-1 boxcar
GOLD MEDAL MODELS #160-25 Freight Car Ladders
MTL #499 05 050 AJAX BRAKE WHEELS
Decal I used;
: applied sill, stirrup and brake wheel
何か、Boxcar Redのコレクションを増やせないか、とインターネットでネタを探していたら、Athearn製品によく似た車体をもつ車両の写真を見つけた。Clinchfield の7011である。このプロトタイプと同じスキームは、地が青や緑色などのものが、MTLから特製品として発売されている。しかし、例によって高値であるので自作することにした。
画像を参照しながら、屋根上の歩み板を撤去し、屋根までのはしごの上半分を削った。モールドで表現されているタラップも削り落とし、GOLD MEDAL MODELSのFreight Car Laddersを取り付けた。
プロトタイプは、低い直線状の独特の形状をした裾をしている。模型の造形を活かしながら車体側面の裾をこの特徴ある形状にすると台車に当たりそうなので、肉厚のプラスティックによる裾を切り取り、0.2ミリ厚の洋白板で作り直してみた。これなら台車の邪魔にならない。裾のリベットはArcherのデカールである。
いつものように、タミヤのTS-33・ダルレッドを吹き、Microscaleのデカールを貼って仕上げた。
2011-08-26 21:45
コメント(2)
手ブレーキハンドルが上部で、サイドのラダーが下半分だけという車がいるのですね! うぅむ
by ワークスK (2011-08-27 00:05)
その代わり、「NO RUNNING BOARD」の表記はない?!
ワークスKさんがブログで紹介されている1974年版Cyclopedia掲載の指針には適合しませんね。実車写真は80年代の撮影のようですので、その後改訂があったのかも…
by arx_ph.D (2011-08-27 00:43)