Paint Shop – 26 : Seaboard Coast Line Railroad Boxcar 20132, part 1 [Works_Boxcars]
: SCL 20132
Microscale re-produced the decal for SCL freight cars last year. This is a boxcar red boxcar realized through using this product.
This is the SCL 50’ single sliding door boxcar 20132. I found the 1978 prototype photo at Fallenflag site.
I used stock Athearn PS-1 Plug Door Boxcar for the model; sliding door boxcar was out of stock at my shelf. I replaced the plug door with the sliding door came from Atlas 50’ Precision Design Box Car to represent the prototype; please don’t complain of double tack boards. Also replaced and/or added are the brake wheels, grab irons and ladders. Ladders are modified Gold Medal parts #160-25. End crossover walkway is made from Athearn’s etched-metal roof walk. A little modification is added to the sill.
I spray painted the body with Tamiya TS-33 as usual. As TS-33 is a matte paint spray, hiding the decal’s edge was not easy. To improve this, I, this time, tried polishing. I polished the surface of the painted body where decals were going to be applied, with Tamiya Polishing Compound. The polished part badly shines, but it disappears when semi-gloss clear coat is sprayed after applying the decal. Decal used is Microscale #60-6 with #60-2 for data.
Prototype photo found at the Fallen Flag site;
decal I used;
: SCL 20132
これは、昨年Microscaleが再発売したデカールを用いて制作した、Seaboard Coast Lineの貨車である。
Fallenflagのサイトに1978年撮影のプロトタイプの写真がある。屋根の歩み板を外しただけでなく、手ブレーキを下げ、梯子も短いものに取り替えたように見える。
手元のスライディング・ドア・ボックスカーが払底したので、今回はAthearnのプラグ・ドア・ボックスカーを改造した。扉は、以前紹介したD&TIの貨車を作った際派生したパーツを移植した。梯子は一体成形されていたものを削り取り、Gold Medal製品の枠を細く削って接着。端部のデッキ(といえばいいのだろうか?)は、製品に付いていた屋根歩み板から切り出し取り付けた。
いつものようにタミヤのTS-33を吹きつけ、コンパウンドで磨いてからデカールを貼り、半光沢のクリアを吹いて仕上げた。
Microscale re-produced the decal for SCL freight cars last year. This is a boxcar red boxcar realized through using this product.
This is the SCL 50’ single sliding door boxcar 20132. I found the 1978 prototype photo at Fallenflag site.
I used stock Athearn PS-1 Plug Door Boxcar for the model; sliding door boxcar was out of stock at my shelf. I replaced the plug door with the sliding door came from Atlas 50’ Precision Design Box Car to represent the prototype; please don’t complain of double tack boards. Also replaced and/or added are the brake wheels, grab irons and ladders. Ladders are modified Gold Medal parts #160-25. End crossover walkway is made from Athearn’s etched-metal roof walk. A little modification is added to the sill.
I spray painted the body with Tamiya TS-33 as usual. As TS-33 is a matte paint spray, hiding the decal’s edge was not easy. To improve this, I, this time, tried polishing. I polished the surface of the painted body where decals were going to be applied, with Tamiya Polishing Compound. The polished part badly shines, but it disappears when semi-gloss clear coat is sprayed after applying the decal. Decal used is Microscale #60-6 with #60-2 for data.
Prototype photo found at the Fallen Flag site;
decal I used;
: SCL 20132
これは、昨年Microscaleが再発売したデカールを用いて制作した、Seaboard Coast Lineの貨車である。
Fallenflagのサイトに1978年撮影のプロトタイプの写真がある。屋根の歩み板を外しただけでなく、手ブレーキを下げ、梯子も短いものに取り替えたように見える。
手元のスライディング・ドア・ボックスカーが払底したので、今回はAthearnのプラグ・ドア・ボックスカーを改造した。扉は、以前紹介したD&TIの貨車を作った際派生したパーツを移植した。梯子は一体成形されていたものを削り取り、Gold Medal製品の枠を細く削って接着。端部のデッキ(といえばいいのだろうか?)は、製品に付いていた屋根歩み板から切り出し取り付けた。
いつものようにタミヤのTS-33を吹きつけ、コンパウンドで磨いてからデカールを貼り、半光沢のクリアを吹いて仕上げた。
2013-06-14 09:00
コメント(0)
コメント 0