SSブログ

Paint Shop – 76 : Atlanta & West Point Railroad Boxcar 39052, part 1 [Works_Boxcars]

a&wp39052_01.jpg: A&WP 39052

This is a model of a boxcar also decorated with the decal produced by Gerald Glow: Atlanta & West Point Railroad #39052.

I managed to model a Western Railway of Alabama boxcar before. To complete the “West Point Route” citation, I arranged to model Atlanta & West Point Railroad equipment this time. Jerry produced the decal as “A&WP 40’ Steel Boxcar Decal Blt. 1924”. Searching a prototype meeting my body type, scheme, and era, 50’ boxcar red boxcar with ACI plates, led me to a 1974 photo of A&WP #39052 at Boxcars & Freight Cars of North America web site[1]. Accordingly, I decided to model the particular car.

I used a surplus Athearn PS-1 single-door boxcar for the model. I only changed the doors. I decided to mass-produce 9’ Pullman doors because my next projects also needed them. I used 8’ Pullman doors attached to Atlas master PS-1 40’ Boxcars. I first spliced them to a single 9’ wide door, next used silicone rubber to make molds, and finally cast 9’ doors with resin.

I spray-painted the body with Tamiya TS-1. Before applying decals, I polished the surface of the painted body, where decals were going to be applied, with compound. Decal used is by Gerald Glow (Tichy#10063N) as I mentioned above. I spray-painted the semi-gloss clear coat after applying the decals.

[1] 1974 photo of A&WP #39052 at Boxcars & Freight Cars of North America web site;
* 1960 builder's photo of A&WP #39068 at Illinois Digital Archives;

a&wp39052_03.jpg: Pullman door original, mold, and castings


これも、Gerald Glow氏制作のデカールを用いた制作である。選んだプロトタイプは、Atlanta & West Point Railroadというアメリカ合衆国南部を走っていた鉄道の貨車。以前にWestern Railway of Alabamaの貨車を制作したので、これで“West Point Route”を網羅することになる。

Glow氏制作のデカールが使えて、かつ、筆者の対象としている年代・車種・塗色に合致するプロトタイプの1974年に撮影された画像を、Boxcars & Freight Cars of North Americaというサイトで見つけた。

模型には在庫のAthearn製 PS-1 Single Door Boxcarを用いた。工作は、扉をAtlas 40’ PS-1に附属のPullman Doorから型取り複製した自家製パーツに交換したのみである。

サフェーサーを吹いたあと、TamiyaのTS-1で塗装した。デカールの浮きを防ぐため、デカールを施す箇所は予めコンパウンドで磨いておく。デカールは件のGerald Glow氏制作のもの。Tichyの#10063Nに該当する。今回は、細かい表記も(筆者の裸眼では読めないのをいいことに)Glow氏のデカールをそのまま使用。足らない文字のみ使い残しのMicroscale製デカールで補った。最後に半光沢クリアコートを吹き仕上げた。

コメント(0) 

コメント 0

コメントを書く

お名前:[必須]
URL:
コメント:
画像認証:
下の画像に表示されている文字を入力してください。

※ブログオーナーが承認したコメントのみ表示されます。